FEPeeler Braid-Blade

This custom tungsten carbide blade leverages crush cutting for your most difficult wire braid.  It results in a cleaner cut and will reduce your blade purchases.  The FEPeeler Braid-Blade is designed for use in the FEPeeler RC-1 Roll Cutter.

Because of the blade's convex shape, it is not sharp.  Your team member's will not cut themselves by handling this blade.

Reduce the waste created by all the razor blades you use.

" We received all of the components and started playing with the cutter and the braid blade.

We could not wrap our heads around why this blade should work as the cutting end of the blade is not sharp at all – and will not cut skin!!!

The roll cutter did not leave a tail on the catheter when cut – I know Todd put a ton of design time into this to ensure a great cut.

I started cutting on a small catheter with .001” x .003” flat wire braid using the cutter and regular Gem blade, the cutter worked great, and finished product had no tails, but as usual I needed to change the blade after every cut.

Then I switched to the braid blade and to my surprise it worked great. 

I think I did about 30 cuts, all flawless with the braid blade and NO damage to the blade.

So I cut a larger catheter with a much larger flat wire braid (.002” x .008”) and again it worked flawless with little effort. 

I still do not know why this works but it does!!! 

I am now a believer."